Christie Roadster HD14K-M Projector with Spare Lamp, Fly Cage, and Road Case

With a ruggedized, compact form factor, the Roadster HD14K-M projector provides high-performance and feature-rich options that you have come to expect in all Christie products. With embedded warping, blending and color matching, portrait capabilities and a wide variety of high-quality lenses that use our Intelligent Lens System (ILS™), the M series provides extensive installation flexibility for any application.

The Christie HD14K-M, at 14,000 lumens also offers high efficiency by giving you more brightness while using less power for a low cost of ownership. Combined with a 3-year warranty and our industry-leading service and support, the M Series offers performance and peace of mind.

• Contrast aperture – provides variable contrast ratio from 2500-10000:1 (Full on/off) for crisp, detailed images.
• LiteLOC™ - Advanced variable lamp output for color matching across multiple screens
• Comprehensive Color Adjustment (CCA™) - Individually adjust each RGB channel for even color matching
• Embedded Christie Twist​™ image warping and edge-blending
• Multi-windowing and screen processing (up to a 2x3 array)
• Intelligent Lens System (ILS™) providing motorized zoom, focus, horizontal and vertical offset
• Digital keystone correction
• Two high definition input channels that allow 4:4:4 HD signals
• 3D upgradable 

ISO lumens

• 14,062

Center lumens

• 13,500

ANSI lumens

• 12,500

Contrast ratio

• 10,000:1

Display type

• 0.96" 3DLP

Digital micromirror device

• 3DLP® - 3 x DMD

Resolution

• HD (1920 x 1080)

Illumination type

• Dual 450W lamp

Illumination performance (hrs)

• Standard: 1750 hrs | Eco mode: 2000 hrs

Orientation

• Portrait OR 360° vertically

Scan rates

• Horizontal: 15 to 120 kHz / Vertical: 23.97 to 150 Hz

Pixel clock rate

• 165 MHz

Standard inputs

• Twin DisplayPort input card
• Dual-link DVI input card
• 3G SD/HD-SDI

Optional inputs

• Dual-link DVI
• Dual 3G SD/HD-SDI
• Twin HDMI w/Active loop through
• Twin DisplayPort input card
• Dual-link DVI input card
• 3G SD/HD-SDI

Controls and networking

• RS232 in/out
• RS422 in
• Ethernet (10/100)
• USB
• GPIO (RS232 9-pin male connector)
• Built-in backlit LCD keypad
• Remote control (with optional wired XLR connection)

Optical system

• Dust-sealed, 3-chip, DMD light engine
• Scheimpflug (tilt) adjustment
• Built-in light shutter
• Motorized horizontal and vertical lens offset
• Tool-free lens insertion system

Fixed lenses

• 0.67:1 ILS lens
• 1.1:1 ILS lens

Zoom lenses

• 1.16-1.49:1 ILS lens
• 1.4-1.8:1 ILS lens
• 1.8-2.6:1 ILS lens
• 2.6-4.1:1 ILS lens
• 4.1-6.9:1 ILS lens
• 6.9-10.4:1 ILS lens

Offsets

• +/- 120% Vertical
• +/- 54% Horizontal
• ALL LENSES EXCEPT BELOW
• 0.67:1 (±35%V / ±12%H)
• 1.16-1.49:1 (±102%V / ±40%H)

Enhanced feature sets

• 99 channel memories
• Black-level blending
• Auto setup
• Digital keystone correction
• 3D upgradable
• Dust sealed engine, filter-free design - Although the unit can be run without filters, Christie recommends using filters for assured performance
• Menus in five languages

Power requirements

• 110-240 VAC 50/60 Hz operating voltage
• 15 A @100V operating current
• 1500W power consumption
• 5118 BTU/hr dissipation

Dimensions (LxWxH)

• 22.1 x 19.7 x 10.2"
• 561 x 500 x 259mm

Weight

• 55lbs (25kg)

Operating environment

• Temp: 40 to 104° F (5 to 40° C)
• Humidity: 20-80% non-condensing

• (1) Christie Roadster HD14K-M
• (1) 450W M Series Spare Lamp (Brand New)
• (1) Power cable
• (1) Remote
• (1) Fly cage
• (1) Case