K-Array Pinnacle-KR102 I Ultra-Light Powered Stereo System

The Pinnacle-KR102 I is as ultra-light powered system stereo system. Each side features 1 x Thunder-KMT12 I subwoofer with 2 channels of 1000 W matched to 1 x Kobra-KK102 I mid-high line array element with 16 x 2" neodymium magnet transducers. The hardware included guarantees ultra fast set-up and optimum mechanical stability. The Pinnacle-KR102 I is perfect for event productions such as weddings, fashion shows and corporate events as well as broadcast and studio applications, houses of worship, and restaurants and cafes.

The KR systems are integrated, self-powered speaker systems, featuring mid-hi line array elements matched to powered subwoofers. All systems feature two channels of Class D amplification housed in the subwoofer. The rear panel provides input for 2 balanced line signals and a digital signal in AES/EBU protocol. And with the K-dante accessory, the system can be used in a Dante network.

An integrated touch screen provides intuitive managing and editing of powerful DSP controlling: Input and output levels, In/Out routing, subwoofer delay up to 12 ms, Speakon output to the mid-hi element with delay up to 12 ms, and overall system delay up to 330 ms. All DSP functions, including EQ can be controlled with remote managing software via USB or RS485, again, conveniently on a standard XLR.The unique four-corner port configuration gives symmetrical back loading to the sub speaker for extended bass response with very low distortion.

This also gives incredible structural strength to the cabinet despite its light weight. Pocket handles in the sub and an M20 thread mount position for attaching mid-high speakers, with a variety of mounting and rigging hardware options make the systems very versatile in almost any application and in every type of venue.KR102 features pair of KMT12 (12”) subs each with 2 channels of 1,000 W matched to a Kobra loudspeaker with 16 x 2” neodymium speaker elements.

Kobra-KK102 I

General

• Type: Line array
• Transducers: 16 x 2" neodymium magnet woofers
• Frequency Response: 1 150 Hz – 18 kHz (-6 dB)
• Max SPL: 2 126 dB (peak)
• Rated Power: 400 W
• Coverage: V. 7° - 35° | H. 120°
• Connectors: SpeakOn NL4: 1+ 1- (signal); 2+ 2- (through)
• Nominal Impedance: 8 Ω / 32Ω selectable

Handling & Finishes

• Dimensions (WxHxD): 59 x 1000 x 81 mm (2.3 x 39.4 x 3.2 in)
• Weight: 4,8 kg (10.6 lb)
• Material: Stainless Steel
• Colors: Black, White, Custom RAL
• Finishes: Gold, Polished, Brushed

Regulations

• IP Rating: IP64
• EN54-24: EN 54-24:2008 compliant

Thunder-KMT12 I

Acoustics

• Power handling: 700W (AES)
• Max Power: 1200 W
• Impedance: 8 Ohm
• Frequency range: 45-150Hz (-6dB)
• SPL 1W/1mt: 99 db
• Maximum SPL3: 128dB (cont) - 131dB (peak)

Coverage

• Type: Omni 

Crossover

• Type: DSP controlled
• Frequency: 150 Hz (preset dependent)

Transducers

• Full range: 1 x 12” Neodymium speakers with 3” voice coil

Power Audio Input

• Analog Connectors: 2 male + 2 female 3-pin balanced XLR
• Digital Connectors: 1 male + 1 female 3-pin XLR

Audio Powered Output

• Connector: Female Speakon
• Wiring: Pin1+= CH1+ Pin1= CH1- | Pin2+= N.C. Pin2= N.C.

Remote Control Input

• Connectors: 1 male + 1 female XLR parallel / 1 USB B | Jack serial converter

Power Input

• Connectors: 2 x PowerCon IN/OUT

Amplifiers

• Type: 1 modules class D - DSP controlled
• Subwoofer power: 1000 Watt 1 @ 8Ω
• Speaker power output: 1000 Watt 1 @ 8Ω
• Protections: Dynamic limiter, over current, over temp, short circuits

AC Power

• Nominal power requirements: 100 - 240 Vac ± 10% 50-60 Hz
• Operating range: 85 – 265 Vac (auto-range)

Consumption

• 1/8 rated power (pink noise) @ 8Ω: 300 W

Physical

• Dimensions: 32.6 x 32.7 x 43.3 cm (12.83” x 12.87” x 17.04”)
• Weight: 15.6 Kg (34.39 lb)

• (2) Kobra-KK102 I Line Array
• (2) Thunder-KMT12 I Subwoofer
• (2) K-Pole1