RTS KP-5032 Keypanel

The KP-5032 and KP-5032PB keypanels deliver superior high-quality digital audio using the Bosch-branded OMNEO technology with Dante by Audinate audio over IP via either copper or fiber. The KP-5032 models deliver top-notch audio, free of noise, delay, and other artifacts present in older technology. This family of keypanels includes a rich set of connectors as standard, including GPIO and RC. As with other RTS products, emphasis has been placed on backward compatibility with previous generations of matrices including analog technology.

The KP-5032 keypanels utilize the latest generation of wide angle TFT displays providing superior clarity, resolution, and longer display life, delivering high-quality readability under a variety of lighting conditions.

LCD Display

• Active Area: 120.10mm (wide) x 35.86mm (high)
• Dot Resolution: 576 x 172 pixels
• Color Resolution: 6-bit (64K)RGB color
• View Angle: 80 degrees (typical; all directions)

Power Supply

• Type: External DC
• AC Input: 100–240VAC 50/60Hz

General Purpose Inputs and Outputs

Outputs

• Type (relays): SPDT
• Contact Rating: 1AMP @ 30VDC

Inputs

• Type: Optically Coupled
• Input Voltage: 5-18 VDC on A+

Note: A+ is internally pulled to 5VDC. Connect K- to to activate.

Inputs

Matrix

• Type: Balanced
• Typical Input Level: +8dBu
• Typical Input Impedance: >10kΩ
• Maximum Input Level: +20dBu
• Supported Bandwidth: 100Hz to 20KHz

Aux 1 and Aux 2

• Type: Balanced
• Typical Input Level: +8dBu
• Typical Input Impedance: >10 k Ω

Front Panel Mic

• Type: Electret
• Typical Input Level: -42dBu
• Typical Input Impedance: 1kΩ
• Maximum Input Level: -25dBu

Rear Panel Mic

• Type: Electret
• Typical Input Level: -42dBu
• Typical Input Impedance: 1kΩ
• Maximum Input Level:  -25dBu

Front and Rear Headset Mic - Electret

• Typical Input Level: -42dBu
• Typical Input Impedance: 1kΩ
• Maximum Input Level: -25dBu

Front and Rear Headset Mic - Dynamic

• Typical Input Level: -50dBu
• Typical Input Impedance: 600Ω
• Maximum Input Level: -25dBu

Outputs

Matrix

• Type: Balanced
• Typical Output Level: +8dBu
• THD+N%: <0.20%
• Typical Output Impedance: 600Ω
• Maximum Output Level: +20dBu
• Frequency Response: 100Hz to 20KHz

MIC/LINE Out

• Type: Balanced
• Typical Output Level: +8dBu
• THD+N%: <0.20%
• Typical Output Impedance: 600Ω
• Maximum Output Level: +20dBu
• Frequency Response: 100Hz to 20KHz

Headset - Front, Rear, Left, Right

• Maximum Output Power: 125mW for 32Ω load
• Earphone Impedance: 16Ω and above
• THD+N%: <0.20%
• Frequency Response: 100Hz to 20KHz

Speaker - Rear

• Maximum Output Power: 5W for 8W load
• Speaker Impedance: 4Ω and 8Ω
• THD+N%: <0.20%
• Frequency Response: 100Hz to 20KHz

Speaker - Front

• SPL: 84dBSPL for 1kHz sine wave @ 1 meter

Digital

OMNEO Channels

• Typical OMNEO Latency: 1ms
• Frequency Response: 20Hz - 20KHz

RVON

• Compression: G.711 | G.729AB | G.722 
• Bit Rate: 64 kbps | 8 kbps | 64 kbps
• Coding Delay: 125 μs | 10 μs | 4 μs 
• Playout Delay: 20-60 ms | 20-120 ms | 20-60 ms
• Bandwidth: 160-224 kbps | 32-112 kbps | 160-224 kbps
• Sample Rate: 8 k | 8 k | 16k

* Data rate depends codec selection

Note: The Playout Delay and Bandwidth depend on the configured amount of audio per packet.

Environmental

Dimensions / Weight

• Dimensions: 17.39” W (without rack ears) x 3.46” H x 3.88” D (441.82mm x 87.96mm x 98.5mm [111.11mm including volume knobs and lever keys])
• Weight: 4.89lb (2.22kg)

Temperature

• Operating: 0° C to 55°C (32°F to 131°F)
• Storage: -20°C to 70°C (-4°F to 158°F)

Power Consumption

• Nominal: 13 Watts
• Maximum: 18 Watts
• Maximum Volt Amp: 48 VA