Clear-Com FSII-BP19 FreeSpeak II 1.9GHz Beltpack

FreeSpeak II® is a high performance wireless solution
operating in the 1.9 and 2.4 GHz frequency bands designed for extensive communication in large-scale operations.

Description

The FSII-BP19 is a rugged, water-resistant beltpack that operates in the ISM licensefree 1.9 GHz frequency range. Featuring the “Clear-Com Sound”, the FSII-BP19 has high audio bandwidth for superior intelligibility and listening comfort.

Operation

The FSII-BP19 can connect to the FreeSpeak II Base Station, FreeSpeak Edge Base Station, Arcadia Central Station or to the Eclipse® HX matrices using the E-IPA-HX interface card. FSII-BP19 users can roam seamlessly between FSII-TCVR-19 or FSII-TCVR-IP-19 transceivers over wide areas. The “Listen Again” feature allows users to replay earlier commands, eliminating the need to repeat communication or
disturb productions. Volume Swap allows for independent level control on channels A, B, C, and D listens.

Increase System Size

The FSII-BP19 can be used interchangeably with any other FreeSpeak II or FreeSpeak Edge beltpack on the same system. Depending on what system you connect to, you can increase the quantities of beltpack users that operated on a single system (see Capacity Chart for details).

Durability

The FSII-BP19 is IP53 rated for wet weather or dusty conditions making it ideal for outdoor productions. For better grip and protection, the beltpack has a rubberized over-mold to protect it from the most rugged environments.

Battery

Using the BAT60 Li-Ion battery, the FSII-BP19 has 18+ hours of battery life. Using an alternative set of 3 AA cells, the battery life is 6-9 hours. The beltpacks also include an USB charging port for recharging or for continuous powered transmissions.

Audio

• Audio Bandwidth: 200Hz-7.5KHz
• No. of Full-Duplex Audio Paths: Up to 5 with individual level control (2 dedicated rotaries, 3 with menu), 2 controls and a main volume
• Mode of Operation: Full duplex on all routes
• Level/Talk Controls: 4 pushbuttons, a reply button and 2 rotary controls
• Enter/Answer-Back Button: 1
• Bluetooth 4.3 Headset Profile | Codec: MSBC using HFP (Hands Free Profile)

Frequency Spectrum

• USA, Canada, Mexico: 1920-1930 MHz
• Transceiver Range Output Power: 100mW

• EU, Russia, Ukraine, Singapore, Hong Kong, Australia, New Zealand, South Africa: 1880-1900 MHz
• Transceiver Range Output Power: 250mW

• Japan: 1893-1906 MHz
• Transceiver Range Output Power: 250mW

• Argentina: 1910 MHz-1930 MHz
• Transceiver Range Output Power: 250mW

• Brazil: 1910 MHz-1920 MHz
• Transceiver Range Output Power: 250m

• Chile: 1910 MHz-1930 MHz
• Transceiver Range Output Power: 70mW

• Taiwan: 1880-1895 MHz
• Transceiver Range Output Power: 250mW

Connectors

• Headset Connector: 4-pin male, Clear-Com standard, options for 5-pin female and 7-pin male with PTT
• Headset Voltage: Maximum of ~+8dBu as set by firmware
• Microphone Type: Electret and Dynamic, selectable in beltpack menu
• Microphone Voltage: Electret Mic:-45dBu (additional 2.5V DC bias voltage positive on Pin 2 and negative on Pin 1 via a 1k resistor).
• Dynamic Mic: -55dBu
• Headset Limiter: Selectable from beltpack menu 

Power

• Modulation: GFSK, TDMA frame 10ms Full and Long slot
• Output Power: (EU/Russia) 10dBm average, (US) 18-20dBm
• Range: Typical indoor range 300ft (90m), outdoor range 800ft (240m)
• Battery: Li-Ion or 3 AA alkaline cells
• Battery Charging: Drop-in charger (AC60) or local USB
• Battery Life: 18+ hours with Li-Ion; 9 hours with 3 x Alkaline AA cells

Environmental

• IP53 water and dust resistance
• Operating: 32º-125ºF (0º-50ºC)
• Storage: 32º-150ºF (0º-70ºC)
• Humidity: Between 20% and 90%, Non-Condensing

Dimensions

• Tapered design at largest points
• Dimensions (HxWxD): 3.75 x 5 x 1.5in (97 x 130 x 45mm) 

Weight

• 9.0oz (0.4kg) including batteries