DSAN Limitimer Wireless Staging Kit

The wireless Limitimer Staging Kit offers a complete timing solution. It includes the Limitimer Speaker Timer (PRO-2000BT-T), Podium Signal Light (PSL-20V), wireless Audience Signal Light with 4-inch solid LED digits (ASL4-ND3BT), and Wireless Signal Light Receiver (TR-2000BT). This Bluetooth-equipped version can be used wired or wireless or a mixture.

ASL4-ND3BT

The ASL4-ND3BT is a wireless version of model ASL4-ND3. It contains an integrated Bluetooth receiver capable of receiving data from a Limitimer equipped with an integrated or external Bluetooth transceiver over distances of 300 feet. When used hardwired, the audience signal light may be powered directly from Limitimer or plugged into an AC outlet for distances of more than 50 feet. They may be set to receive any or all Limitimer programs. This signal light allows connections via Cat-5 or XLR cable and contains input-output ports so that additional signal lights may be daisy chained. The audience signal light has multiple in-out jacks for a variety of interconnections.

This audience signal light can optionally display time of day as either 12- or 24-hour when the connected Limitimer is turned off. Digits can be set to stop counting at 0:00 or continue counting to display overtime.

A flip-out kick stand makes for convenient setups as a downstage monitor. On the back of the display, there are accommodations for 100mm Vesa Mounts.

PRO-2000BT-T

The wireless Limitimer console can be used to drive any signal light or in conjunction with another Limitimer for control of signal lights from two locations. The timer can be preset for up to four individual time settings. Programs are useful for venues where pre-set timing formats can be selected quickly or where timekeeping is separate for each speaker.

PSL-20V

PSL-20V is a small light pod designed to sit on the top or in the well of a lectern.  The signal light contains a small speaker to provide audio cues (optionally). The sloped front contains a 4-digit 7-segment display showing time remaining and small green-yellow-red phase lights. Top surface has 20-mm LED phase lights that can be seen from 100-feet. You may drive up to three PSL-20Vs from one timer.

The switch settings control local behavior:

• Which programs are to be displayed
• Types of sound cues – beep, buzz, chime or none
• Whether time display continues to count (up) after zero
• Whether top lights are enabled
• Whether digital display is enabled
• Sound cue volume – high or low

Twin RJ45 jacks allow daisy-chaining multiple signal lights to the timer. Use XLR to Cat-5 Adaptor (Model CAT5-ADP-L) to connect to timer with XLR cable.

TR-2000BT

Bluetooth wireless receiver for Limitimer signal lights. Use the Bluetooth Wireless Receiver to add an additional wireless signal light to any wireless-enabled Limitimer or TimePrompt.  Up to seven timer-receiver networks can operate independently in proximity.

Multiple signal lights can be connected to the receiver.  Communication distance is approximately 300 feet.

ASL4-ND3BT

• Inputs: RJ45, 3-pin XLR, 12V power jack for 5.5 x 2.1 mm plug
• Class II Bluetooth technology
• Outputs: RJ45, 3-pin XLR
• 12-position dip switch allows for custom settings.
• Dimensions: 22” x 6½“ x 3”
• Weight: 7 lb. 9 oz.

PRO-2000BT-T

• 12-volt external power supply
• Class II Bluetooth technology
• Two Cat5 and one XLR data jacks
• Four Programmable time settings
• Variable audio sounds
• Dimensions: 7½“ x 5” x 3”
• Weight: 1.2 lbs

PSL-20V

• Receives power and data over cable connection to Limitimer or TimePrompt
• Dimensions: 3 ¾“ x 3¼” x 2½”
• Weight: 1.1 lb

TR-2000BT

• Ports: Two RJ45
• 12-V power jack
• Switches: Rotary RF channel selector
• Dimensions: 3½” x 2½“ x 1½”
• Weight: 4 oz.