Decimator MD-HX HDMI/SDI Cross Converter

Combining capabilities usually reserved for a computer-controlled converter the DECIMATOR MD-HX Miniature HDMI/SDI Cross Converter with Scaling & Frame Rate Conversion is a small independent device that features the same proven cross converter found in DECIMATOR's larger MD-DUCC. The MD-HX features both an HDMI and a 3G-SDI input, and can cross convert either signal to the other. It features a built-in scaler and frame rate converter as well, allowing you to convert the input signal to your required output standard.

The MD-HX features one HDMI output and two pairs of 3G-SDI outputs, controllable via fourteen selectable conversion modes, providing you with a variety of modes to fit your needs. This converter does not require a computer or DIP switches to control as it incorporates a small LCD screen for menu functions, and four buttons for control. It comes with a power supply with locking power cable to prevent accidental power loss during use.

SDI FORMATS 

3G:SMPTE 424M@2.97 and 2.967Gb/s

• 1080p@60/59.94/50Hz

HD:SMPTE 292M/274M/296M@1.485 and 1.435Gb/s

• 1080i@60/59.94/50Hz
• 1080p/psf@30/29.97/25/24/23.98Hz
• 720p@60/59.94/50/30/29.97/25/24/23.98Hz

SD:SMPTE 259M@270Mb/s

• 625i50
• 525i59.94

LCD / BUTTON MENU OPTIONS

• SDI output source from HDMI IN, SDI IN, Scaler
• SDI output 1 is loop
• HDMI output type and source from HDMI IN, SDI IN, Scaler
• Scaler source, reference, format and Aspect Controls
• Audio pair routing for HDMI and SDI output
• LCD backlight off time
• Back to Status time

INPUTS 

• 1 x HDMI input
• 1 x (3G/HD/SD)-SDI input

OUTPUTS 

• 1 x HDMI
• 2 x (3G/HD/SD)-SDI Active Loop-through or addition outputs
• 2 x (3G/HD/SD)-SDI outputs

POWER 

• +5V to +32V DC
• Positive Centre Pin

DIMENSIONS 

• 79.5mm x 123mm x 29.5mm (3.1” x 4.8” x 1.2”)