Panasonic PT-MZ20K 20,000 Lumen LCD Projector

World’s Smallest, Lightest, and Quietest 20,000 lm LCD Projector

Introducing the smallest, lightest, and quietest LCD laser projector in its class with up to 20,000 lm, compact 23 kg (50.7 lbs) body, and quiet 42 dB operation. Optimized optical engine delivers a
25% increase in brightness over the 16,000 lm PT-MZ16KL from the same body size, ensuring clear visibility in well-lit spaces.

Long-Life Energy-Saving Design Minimizes Problems

Multi-Laser Drive Engine and Backup Input enable continuous projection even in the event of trouble, and no light-source or filter maintenance is required for 20,000 hours. The series efficiently delivers high brightness with MZ20KL achieving the lowest power
consumption in its class for sustainable operation.

Delivering up to 20,000 lm on AC 100–240 V, a World First

PT-MZ20K Series is the industry’s first 20,000 lm-class projector to deliver full brightness on AC 100–240 V power, eliminating need to install a high-voltage power supply. It supports NFC function, optional lenses including ET-EMU100 Ultra-ShortThrow Zoom Lens, and preactivated upgrade kits for Geo Pro.

• Projector type: LCD
• LCD Panel Size: 25.4 mm (1.0 in) diagonal (16:10 aspect ratio)
• LCD Panel Display system: Transparent LCD panel (x 3, R/G/B)
• LCD Panel Drive method: Active matrix method
• LCD Panel Pixels: 2,304,000 (1920 x 1200 pixels)
• Light source: Laser diode
• Light output: 20,000 lm
• Time until light output declines to 50%: 20,000 hours (NORMAL/QUIET)
• Resolution: WUXGA (1920 x 1200 pixels)
• Contrast ratio: 13,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC]and [DYNAMIC CONTRAST] set to [3].)
• Screen size (diagonal): 2.03–15.24 m (80–600 in), 2.54–10.16 m (100–400 in) with ET-EMU100, 16:10 aspect ratio
• Center-to-corner zone ratio: 85%
• Lens shift (from center of screen) Vertical: ±60 % (+50 %, -20 % with ET-EMU100, ±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered)
• Lens shift (from center of screen) Horizontal: ±20 % (±19 % with ET-EMW200) (powered)
• Keystone correction range: Vertical: ±45° (±5° with ET-EMU100, ±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500),Horizontal: ±40° (±0° with ET-EMU100, ±8° with ET-EMW200/ET-EMW300, ±15° with ET-EMW400/ET-EMW500). When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55°.
• Installation: Ceiling/floor, front/rear, free 360-degree installation
• Power supply: AC 100–240 V, 50/60 Hz
• Maximum power consumption: 1100 W (11.2–4.6 A) (1120 VA)
• On-mode power consumption (Operating mode): [NORMAL]1050 W (AC 100–120 V),1000 W (AC 200–240 V)[QUIET]630 W (AC 100–120 V),610 W (AC 200–240 V)
• Cabinet materials: Molded plastic
• Filter: Included (Estimated maintenance time: approx. 20,000 hours)
• Operation noise: 42 dB (NORMAL), 36 dB (QUIET)
• Dimensions (W x H x D): Approx. 650 x 185 x 440 mm (25 19/32˝ x 7 9/32˝ x 17 5/16˝) (excluding feet and protrusions),650 x 211 x 440 mm (25 19/32˝ x 8 5/16˝ x 17 5/16˝) (excluding protrusions, with feet at shortest position)
• Weight: Approx. 23.0 kg (50.7 lbs)
• Operating environment: Operating temperature: 0–45 °C (32–113 °F)9, operating humidity: 10–80 % (no condensation)

Terminals

• SDI IN: BNC x 1: 3G/HD-SDI input
• HDMI IN: HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input), CEC supported
• SERIAL/MULTI PROJECTOR SYNC IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
• SERIAL/MULTI PROJECTOR SYNC OUT: D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
• REMOTE 1 IN: D-sub 9-pin (female) × 1 for external control (parallel)
• REMOTE 2 IN: M3 x 1 for wired remote control
• REMOTE 2 OUT: M3 x 1 for link control (for wired remote control)
• DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant),100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input5)
• LAN: RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
• DC OUT: USB connector (Type A) x 1 for power supply (Output: 5 V / 2 A)
• USB: USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory