Fostex 6301NX 4" Active Monitor

Features

20W D-class power amplifier for higher output level and less power consumption with no heat sink
Dedicated 4-inch full range driver for clear audio reproduction
Flat panel design to avoid inadvertent power-off or level change
Auto Stand-by mode (compliant to ErP directive) for energy saving
Transformer Balanced XLR Input
1/4" Unbalanced Input

Quantity:

Description

The 6301NX from Fostex is a compact monitor speaker for use in professional mobile, project, or home studios and features a 4" full-range driver powered by an integrated 20W D-class amplifier. Inputs include a transformer balanced XLR connector and a 1/4" unbalanced connector.

The front panel provides a power switch and a rotary level control for easy volume adjustments. An automated protection circuitry prevents overloads and short circuits, while the die-cast aluminum enclosure is made to withstand the rigors of professional use.

20W D-class power amplifier for higher output level and less power consumption with no heat sink
Dedicated 4-inch full range driver for clear audio reproduction
Traditional rugged enclosure of aluminum die-cast with the physically identical height and width to the current B-series
Flat panel design to avoid inadvertent power-off or level change
Auto Stand-by mode (compliant to ErP directive) for energy saving
Detachable IEC type power inlet with multi-voltage power handling

Specifications

SPEAKER SECTION

Enclosure type: closed
Unit: 4” full range
Frequency response: 70 Hz – 15k Hz
Sound Pressure Level: 85dB / W (1m)
Maximum SPL: 98dB

INPUTS

All Models

Connector: 1/4” TS Phone (unbalanced)
Input Impedance: 10k ohm or more

6301NX

Connector: XLR-3-31 (transformer balanced)
Input Impedance: 10k ohm or more

6301NE

Connector: XLR-3-31 (electrically balanced)
Input Impedance: 10k ohm or more

6301ND

Connector: XLR-3-31 (IEC 60958 AES/EBU)
Input Impedance: 110 ohm or more

6301DT

Connector: RJ45 (Dante)

OUTPUT (THRU)

6301ND

Connector: XLR-3-32 (IEC 60958 AES/EBU)

AMPLIFIER SECTION

Rated output: 20W
Distortion (T.H.D.): 0.05% (1kHz / 1W output)

Residual Noise

NB/NE/NX: -70dBV or less
DT: -65dBV
ND: -65dBV or less

Input Sensitivity

1/4” TS phone: -14dBV (0.2Vr.m.s.)
XLR: +4dBu (1.2Vr.m.s.)
XLR (Digital): -12dBFS

Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold level

GENERAL

Dimensions

W x H x D: 120 x 189 x 120 mm (4.7 x 7.4 x 4.7 in)

Weight

NB/NE/ND: 2.2kgs (4.9lbs)
NX/DT: 2.3kgs (5.1lbs)

Power Requirement: AC 100 – 240V (50/60Hz)
Power Consumption: 10W (less than 0.5W in stand-by mode)