Adtec Digital RD-71 Super-Low Latency 10-bit 1080P Receiver/Decoder

Adtec Digital’s RD‐71 is a contribution class IRD supporting MPEG 2 and AVC (H.264), multi‐chroma 4:2:0/4:2:2 and 10-bit. With support for super-low latency decoding, an array of IP transport capabilities and DVB-S2X demodulation, the RD-71 is versatile and reliable.

The RD-71 supports MPEG 1 Layer 2, AAC-LC, Dolby Digital, Dolby E and Linear PCM audio. The optional demodulator supports DVB-S, S2, and S2X with modes ranging from QPSK to 64APSK and multi‐stream ISI support. Service filtering allows the RD-71 to operate in bandwidth constrained turn-around and redistribution applications.

• AVC (H.264), 4:2:2, 10-bit, 1080P Video Decoding
• MPEG 2, 4:2:2 Video Decoding
• Copper, Fiber SFP, and CVBS Video Outputs
• 1, 2, and 3 Frame End-to-End Latency
• MPEG 1 Layer 2, AAC-LC, and DD Audio Decoding
• Passthrough DD, Dolby E and LPCM
• DVB-S/S2/S2X, UDP, RTP, Zixi and ASI Transport
• Simultaneously Output SD/HD with Downscaling
• Service Filtering and IP Output for Turn-Around
  and Redistribution Applications

VIDEO DECODER PROFILES

• MPEG 2 HD/SD Profile: ISO 13818-2 MP@ML, SP@ML, 422P@ML, MP@H14L, MP@HL, SP@H14L, SP@HL and 422P@HL
• MPEG 4 HD/SD Profile: Baseline, Main, High and High422 (8-bit and 10-bit) up to Level 4.2
• Supported Resolutions: 480i59.94, 576i50, 720p50/59.94, 1080i50/59.94, 1080p50/59.94

INPUTS

• Sync Input: Auto-detects Bi-Level and Tri-level sync for Genlock, 3D and 4K applications | Connector: 1 X BNC (75 Ohm)
• DVB-ASI Input: Interface: ASI 188/204/208 Byte (EN 50083-9 up to 210 Mb/s) | Connector: 1 X BNC (75 Ohm)
• IP Input: UDP, RTP and SMPTE 2022-1 2007 FEC | Supports 1 to 7 TS packets per IP packet | IGMP v2 and v3 support | Zixi Receiver and Link | TS Rate: Up to 210 Mb/s | Connector: 2 X RJ45 | Connector Speed: GigE (10/100/1000 Auto-Negotiate)

AUDIO PROCESSING PROFILES

• Supported Audio: Up to eight pairs (sixteen channels) of audio | MPEG 1 Layer 2, AAC-LC (2.0/5.1) and AAC-6.0 surround sound decode | Dolby Digital AC-3 stereo downmix and passthrough | Dolby E and Linear PCM passthrough

3G-SDI / HD-SDI / SD-SDI

• Standard: SMPTE 424M - 3G | SMPTE 292M - HD | SMPTE 259M - SD | Two banks of SDI with independent downscale capable of simultaneous SD/HD output | Connector: 3 X BNC (75 Ohm), 1 X SFP

CVBS

• Standard: SD NTSC, PAL-B/G, Composite Video Output | Connector: 1 X BNC (75 Ohm)

AES Audio

• Standard: AES3/EBU Unbalanced | Connector: 8 X BNC (75 Ohm)

Analog Audio

• Two balanced pairs via two DB9 connectors (One pair per DB9)
• Connector: 2 X DB9 (600 Ohm)

VBI / VANC PROCESSING

• Waveform / Ancillary: Closed Captioning (CEA-608/708) | AFD (SMPTE 2016) | OP-47 | Generic ANC (SMPTE 2038) | Line 21 Captions (CEA-608) | Teletext

CONDITIONAL ACCESS

• Standard: DVB Common Scrambling Algorithm Basic | Interoperable Scrambling System (BISS): Mode 0 Clear (Free To Air - FTA), Mode 1, Mode E

DVB-ASI OUTPUT

• Standard: Asynchronous Serial Interface per EN 50083-9 | Connector: 3 X BNC (75 Ohm)

IP OUTPUT

• Standard: UDP | RTP | SMPTE 2022 FEC (Up to four IP destinations may be defined) | Connector: 2 X RJ45

SERVICE FILTERING

• Up to five services per output can be defined to the ASI and IP Outputs

PHYSICAL

• Operating Temperature (Ambient): 0C to 50C / 32F to 122F
• Storage Temperature (Ambient): -30C to 80C / -22F to 176F
• Power: Redundant auto switching dual | 100 - 240 VAC 50/60Hz
• Wattage: (Startup/Operational) No Demodulator 35W/36W | LB 35W/37W | PRX 46W/46W
• Weight: 9 lbs. / 4.08kg, base version
• Measurements (H X W X D): 1.75” X 19” X 18” | 44.45mm X 482.6mm X 457.2mm