Community R.35COAXW 10" 2-Way Coaxial Speaker, White

The R.35COAX is a two-way, full-range loudspeaker system designed to provide high quality voice and music reproduction in applications requiring extreme weather resistance. It is designed to withstand long-term exposure to tough, environmental conditions and to provide performance normally associated only with indoor loudspeakers. The R.35COAX has a 1.25-inch (32mm) exit HF compression driver and a 10-inch (254mm) cone LF driver with a 2-inch voice coil. The HF assembly is coaxially mounted with the LF driver allowing 90° conical coverage with low distortion. The carbon ring cone design provides a cone area nearly equivalent to a typical 12-inch driver cone.

The Music / Voice switch provides an out-of-the-box selectable flat response or 3dB boost for increased vocal intelligibility allowing for additional application flexibility. The design uses Biamp's proprietary Tru-Phase™ high frequency compression driver phase plug to provide wide dispersion, low distortion and increased intelligibility. The LF driver cone is treated with the same hydrophobic protection as the grille cloth to provide full weather-resistance. The enclosure has a reinforced ribbed interior with weather-treated wooden inserts to reduce resonance, increase rigidity and reduce rear and lateral radiation.

• Excellent musicality and intelligibility, and low distortion in an extremely compact enclosure
• Weather-resistant, compact, matte finish paintable high impact ABS plastic modified-trapezoidal enclosure
• Hydrophobically-treated grille and LF driver cone, polymer HF diaphragm, and moisture-sealed crossover
• 200W Autoformer (standard), selectable 8 ohm or 70V/100V operation
• Corrosion-resistant dual-layer powder-coated low-profile steel yoke and aluminum grille

Operating Mode

• Passive, Selectable Low Impedance or 70V/100V

Operating Environment

• Indoor or Weather-Resistant Outdoor

Operating Range

• 70 Hz to 16 kHz

Nominal Beamwidth (H x V)

• 90° x 90°

Transducers

• LF: 1 x 10" (254mm) Carbon ring cone with hydrophobic treatment, 2" (51mm) Voice Coil
• HF: 1 x 1.25" (32mm) exit compression

Continuous Power Handling @ Nominal Impedance 

• Passive 40V 200W @ 8 Ohms (800W peak)

Autoformer Taps 

• 70V: 200W,100W, 50W, 25W
• 100V: 200W,100W, 50W

Nominal Sensitivity

Music

• Passive @ 1W: 97 dB
• Passive @ 2.83V: 97 dB

Voice

• Passive @ 1W: 99 dB
• Passive @ 2.83V: 99 dB

Nominal Maximum SPL (Whole Space) 

Music

• Passive | Peak: 126 dB
• Passive | Continuous: 120 dB

Voice

• Passive | Peak: 128 dB
• Passive | Continuous: 122 dB

Equalized Sensitivity 

Music

• System @ 1W: 97 dB
• System @ 2.83V: 97 dB

Equalized Maximum SPL

Music

• System | Peak: 126 dB
• System | Continuous: 120 dB

Required Accessories 

• High Pass Filter - 70 Hz, 24 dB /octave, Digital Signal Processor

Recommended Amplifiers 

• Passive 200W - 400W @ 8 Ohms, (40V - 57V)

Input Connection 

• NL4 Speakon-type connector (low impedance only), and 7-position terminal strip for low impedance or constant voltage operation

Controls 

• Music / Voice switch, 70V/100V operation jumper

Mounting Points 

• Two (2) M8 rigging points

Environmental

• IP55W per IEC 529, designed to MIL-STD-810G
• Color-matched ABS plastic input panel weather cover with 13.5mm ID gland nut installed in .82" knockout

Dimensions 

• H x W x D: 11.00" x 13.00" x 13.50" (279 x 330 x 343 mm)

Weight 

• 26 lbs (11.8 kg) with included yoke