Sony BRC-H900 PTZ Camera with RM-IP10 Controller
Condition: Like New
Brand New — Gear has never been used and is still in original packaging.
Open Box — Gear has never been used, but the factory seal is broken on packaging.
Like New — Gear has been used, but has little to no cosmetic damage.
Good — Gear is in good working condition with moderate cosmetic damage.
Fair — Gear is functional, but with obvious wear and tear.
For Parts Only — Gear is not functional, but has salvageable parts that can be used to repair similar gear.
Sony BRC-H900 PTZ Camera with RM-IP10 Controller
Description
BRC-H900
Remotely capture broadcast quality Full HD images with smooth, silent PTZ
The BRC-H900 remote studio camera combines uncompromising broadcast picture quality with the flexibility of PTZ operation.
Designed for unattended operation, this compact but powerful robotic camera is an ideal complement to other broadcast cameras for capturing images in hard-to-reach or unobtrusive positions. It's equally at home in TV newsrooms, remote studios and on-air suites, auditoriums, houses of worship, courtrooms or outdoor sports events.
The sensitive ½-type Exmor 3CMOS image sensor captures detail-packed Full HD footage with low noise and a wide dynamic range. Smooth, speedy remote PTZ with 14x optical zoom and on-board image stabilization accommodates wide-angle scenes and tightly framed close-ups. Broadcast-friendly features include dual tally lamps for on-air operation, while operational flexibility is enhanced with options for ceiling, table top or tripod mounting.
There’s also a broad range of video interface and remote control possibilities, simplifying smooth integration into any broadcast or professional AV environment.
RM-IP10
Control of up to 112 BRC cameras via an IP network
The RM-IP10 remote control panel gives you control of up to 112 BRC cameras over an IP network, or seven cameras over a traditional VISCA-controlled network. Up to five remote control panels can share control of the system.
Easy to install control for BRC-H900, BRC-Z330 and BRC-Z700 cameras
The RM-IP10 is compatible with Sony's BRC-X400,*1 SRG-X400,*1 SRG-X120,*1 BRC-X401,*1,*2 SRG-201M2,1,*2 SRG-HD1M2,1,*2 BRC-H900, BRC-H800, BRC-X1000, SRG-300SE, SRG-300H, SRG-120DU, SRG-120DH, and SRG-120DS camera models.
Control with BRC-H900 and older BRC-Z330 camera models require installation of camera option board BRBK-IP10, and the BRC-Z700 camera is controlled when it is fitted with the BRBK-IP7Z option board. Easy and economical installation and setup saves you time and cost.
Features
BRC-H900
Broadcast quality Full HD images
The BRC-H900 delivers uncompromised broadcast quality color pictures in Full HD, thanks to three 1/2-inch type Exmor CMOS sensors. Advanced picture adjust functions include matrix, color correction, white, detail, knee, gamma, master black, black gamma and flicker cancel.
High quality 14x optical zoom lens
The high quality lens with 14x optical zoom range covers wide angle shots as well as tight close-ups, making the BRC-H900 ideal for use in a wide range of applications, from broadcast studios to conference halls, boardrooms and outdoor events.
Excellent low light sensitivity
With high sensitivity (F10) and excellent minimum illumination (4 lx), the BRC-H900 can capture crisp, low noise pictures even in dimly lit studios and meeting rooms.
Smooth, silent Pan/Tilt/Zoom (PTZ) operation
Accurately re-frame shots or track moving subjects with smooth, speedy remote control of pan, tilt and zoom functions. There's also a slow pan/tilt mode for precise, judder-free low-speed camera movements. Near-silent operation makes the camera ideal for broadcast studios and other noise-conscious environments.
Steadier, more stable images
On-board image stabilization ensures crisper, more stable images in situations where the camera is subject to movement and vibration.
Flexible installation
The BRC-H900 is equally suitable for ceiling, dektop or tripod mounting, with an 'Image Flip' function that automatically ensures the correct output orientation in any installation environment. Ceiling bracket included.
Remote operation
Pan/tilt/zoom and other camera settings can be controlled using the supplied IR remote commander, or with the optional RM-BR300 Remote Control Unit that can control multiple cameras.
Optional IP control
Large-scale systems of up to 112 BRC-H900 cameras can be controlled over standard IP networks by adding the optional BRBK-IP10 IP remote control board and RM-IP10 remote controller.
Versatile video outputs
Extensive video outputs - including HD/SD-SDI, component and composite Y/C - give greater installation flexibility in professional broadcast and AV environments.
Wide range of expansion options
The camera can be configured with a choice of optional accessory cards, including the BRBK-HSD2 (HD/SD-SDI output), BRBK-SA1 (Analog SD output), BRBK-SF1 (HD optical multiplex) and BRBK-IP10 (IP control). Also available are the BRU-SF10HD optical multiplex unit and CCFC-S200 optical fiber cable for operation over long distances.
Front and rear tally lamps
Ideal for on-air broadcast use, the BRC-H900 features dual tally lamps on the front and rear of the camera body. Brightness of the front tally lamp can be adjusted in two steps.
RM-IP10
Control of up to 112 BRC cameras via IP
The RM-IP10 remote control panel gives you control of up to 112 BRC cameras over an IP network.
Additional ability to use VISCA control
The RM-IP10 can also control up to 7 BRC cameras over a traditional VISCA (Video System Control Architecture) network.
Compatible Sony cameras
The RM-IP10 is compatible with Sony's BRC-X400, SRG-X400, SRG-X120, BRC-X401*, SRG-201M2*, SRG-HD1M2*, BRC-H900, BRC-H900, BRC-H800, BRC-X1000, SRG-300SE, SRG-300H, SRG-120DU, SRG-120DH and SRG-120DS cameras when they are fitted with the BRBK-IP10 option board, and the BRC-Z700 camera when it is fitted with the BRBK-IP7Z option board.
*Model sold in China only
Simple RJ-45 (10Base-T/100Base-TX) connection for easy connection
The RM-IP10 links to an IP network with via a RJ-45 connector providing very easy, low cost and speedy installation.
PC configuration software supplied
The RM-IP10 provides for convenient configuration of system IPs and BRCs numbers, with location free configuration of anetwork.
Up to 5 controllers can operate on a single network
Up to 5 RM-IP10 control panels can be used on a single network allowing shared control and simultaneous multi-operator control of large camera systems.
Simultaneous Preset recall to all cameras under control
Instantaneous set-up of multiple cameras provides a big time saving for camera adjustments.
Specifications
BRC-H900
Camera
- Image Sensor: 1/2-type Exmor CMOS x3
- Image Sensor (Number of Effective Pixels): 2.07 Megapixels x3
- Image Sensor (Total Number of Pixels): Approx. 3.01 Megapixels
- Signal System: 60 Hz: 1080/59.94i, 720/59.94P, NTSC | 50 Hz: 1080/50i, 720/50P, PAL
- Sensitivity: F10
- Minimum Illumination (50IRE): 4 lx (50IRE, F1.9, +24 dB)
- Horizontal Resolution: >1,000 TV line (in HD-SDI output)
- S/N Ratio: 50 dB
- Gain: Auto/Manual (-3 dB to +24 dB)
- Shutter Speed: 1/8,000 s to 1/60 s or 1/8,000 s to 1/50 s
- Exposure Control: Auto, Manual, Priority mode (shutter priority & iris priority), Back light, Spot light
- Color AE Function: No
- White Balance: Auto/Indoor/Outdoor/One-push/Manual
- Optical Zoom: 14x
- Digital Zoom: -
- Focusing System: Auto/Manual
- Horizontal Viewing Angle: 59.6° (Wide-end)
- Focal Length: f=5.8 mm to 81.2 mm | F1.9 (Wide), F2.8 (Tele)
- Minimum Object Distance: 300 mm (Wide), 800 mm (Tele)
- Pan/Tilt Angle: Pan: ±170° | Tilt: +90°/-30°
- Pan/Tilt Speed: Pan: 0.22° to 60°/s | Tilt: 0.22° to 60°/s
- Preset Position: 16
Camera Features
- Auto ICR: No
- Wide-D: No
- Image Stabilization: Yes
- Image Flip: On/Off
- ND Filter: No
- Color Gain: No
- Color Hue: No
- Color Matrix: ON/OFF
- Color Detail: ON/OFF
- Skintone Detail: No
- Gamma: STD1/STD2/STD3/STD4/CINE1/CINE2/CINE3/CINE4
- Gamma Level: -99 to 0 to +99
- Black: -99 to 0 to +99
- Black Gamma: -99 to 0 to +99
- Knee Point: 50 to 90 to 109
- Knee Slope: -99 to 0 to +99
- Knee Sat Level: 0 to 50 to 99
- Auto Focus Assist Function: No
- Flicker Cancel: On/Off
- B&W: No
- Color Bar: On/Off
Interface
- HD Video Output: HD/SD-SDI(switchable) | Component (Y/Pb/Pr) or RGB, HD, VD or SYNC
- SD Video Output: Composite, Y/C
- Camera Control Interface: RS-232C/RS-422 (VISCA)
- External Sync. Input: Yes
General
- Power Requirements: DC 10.8 V to 13.2 V
- Power Consumption: Max 28.8 W (without optional cards)
- Operating Temperature: 0 °C to 40 °C | 32 °F to 104 °F
- Storage Temperature: -20 °C to +60 °C | -4 °F to +140 °F
- Dimensions (W x H x D): 198 x 260 x 238mm | 7 7/8 x 10 1/4 x 9 3/8 inch
- Mass: 5.0 kg | 11 lb 0.37 oz
- Optional Card Slots: Yes
- Body Color: Silver
- Size of Screw Hole for Tripod: Φ5 depth 5
- Mountable Angle: < ±15°
- Ceiling Mount: Yes
RM-IP10
Input / Output Connectors
- Control input/output: VISCA RS-232C OUT Connector : Mini DIN 8pin type | VISCA RS-422 connector: 9-pin type LAN : RJ-45, 10BASE-T/100BASE-TX automatically detected | Tally In/Contact Out: 9-pin type
- Control signal format: 9,600 bps/38,400 bps (for RS-232C/RS-422 communication) | VISCA over IP communication
- Power Connector: JEITA type 4 (DC IN 12V)
General
- Input voltage: 12V DC (10.8 to 13.2V DC)
- Current consumption: 0.3A max. (at 12V DC), 3.6W
- Operating temperature: 0℃ to 40 ℃ (32°F to 104°F )
- Storage temperature: -20℃ to 60 ℃ (-4°F to 140°F )
- Dimensions (W x H x D): 391.3 mm x 165 mm x 145.9 mm (15 ½ inches x 6 ½ inches x 5 ¾ inches)
- Mass: Approx. 950g (2 lb 15 oz)
User Interface
- Display: No
- Speed Control: No
- Zoom Seesaw Lever: No
- Zoom Ring of Joystick: Yes
- Zoom Control selectable: Ring of Joystick
- ASSIGN button: 0
- Kensington lock hole: No
Camera Control
- Maximum IP Connections: 112
- Maximum Serial Connections: 7
- Control Protocol: VISCA over IP/VISCA RS-422/VISCA RS-232C switchable
- Max Controller qty (/sys): 5
Direct Function of Buttons/Knobs
- Exposure mode selection: No
- One-push white balance auto adjustment: No
- One-push black balance auto adjustment: No
- Toggle color bars output on/off: No
- Toggle backlight compensation on/off: Yes
- Toggle flicker compensation on/off: No
- Display the status of iris,gain,shutter speed and zoom position: No
- R gain and B gain adjustment: Yes *1
- R black and B black adjustment: Yes *1
- Master black adjustment: No
- Detail level display: No
- Detail level adjustment: No
- Knee point display: No
- Knee point adjustment: No
- AE level display: No
- AE level adjustment: No
- Iris setting display: No
- Iris value adjustment: Yes *1
- Gain setting display: No
- Gain value adjustment: Yes *1
- Shutter speed display: No
- Shutter speed adjustment: Yes *1
*1: Need multiple button/knob/DIP SW operation
Experience That Matters
First and foremost we're a production company. Production is in our blood. We have the experience that matters to not only provide you the right gear, but offer a full-service, custom solution for your audio-visual needs.
Gear You Can Trust
We're a team of AV professionals that are obsessed with quality, high-end gear. All of our gear is selected by, maintained by, and used by our own technicians and engineers on site.
Hands On Support
Need help finding the right gear or looking for a recommendation for your next event? Our team of experts can make gear selection a breeze.
Stay up to date on the latest gear and industry trends.
Join the Panavid Gear Newsletter
Streamlining Your Experience
Apologies for the inconvenience, but we kindly request that rental and used gear items be ordered separately to ensure a smooth ordering process. Thank you for your understanding and cooperation.