Community R.15COAXW 6.5" 2-Way Coaxial Speaker, White

The R.15COAX is a two-way, full-range loudspeaker system designed to provide high quality voice and music reproduction in applications requiring extreme weather resistance. It is designed to withstand long-term exposure to tough, environmental conditions and to provide performance normally associated

only with indoor loudspeakers. The R.15COAX has a 1.25-inch (32mm) exit HF compression driver and an 6.5-inch (165mm) carbon ring cone LF driver. The HF assembly is coaxially mounted with the LF driver allowing wide 100° coverage with low distortion. The flange-less woofer basket design allows a cone area nearly equivalent to a typical 8-inch driver cone.

The Music / Voice switch provides an "outof-the-box" selectable response allowing for additional application flexibility. The design uses Biamp's proprietary Tru-Phase™ high frequency compression driver phase plug to provide wide dispersion, low distortion and increased intelligibility. The enclosure is sealed to provide maximum vocal clarity and increased intelligibility. The sealed enclosure also provides supreme weather protection for all of the interior components.

• Excellent musicality and intelligibility, and low distortion in an extremely compact enclosure
• Weather-resistant, compact, matte finish paintable high impact ABS plastic modified-trapezoidal enclosure
• Hydrophobically-treated grille and LF driver cones, polymer HF diaphragm, and moisture-sealed crossover
• 120W Autoformer (standard), selectable 8 ohm or 70V/100V operation
• Corrosion-resistant dual-layer powder-coated low-profile steel yoke and aluminum grille

Operating Mode 

• Passive, Selectable Low Impedance or 70V/100V

Operating Environment 

• Indoor or Weather-Resistant Outdoor

Operating Range

• 90 Hz to 16 kHz

Nominal Beamwidth (H x V)

• 100° x 100°

Transducers 

• LF: 1 x 6.5" (165mm) Carbon ring hydrophobic cone, 2" (51mm) VC
• HF: 1 x 1.25" (32mm) exit, polymer diaphragm compression driver

Continuous Power Handling @ Nominal Impedance

• Passive 35V 150W @ 8 Ohms (600W peak)

Autoformer Taps

• 70V: 120W, 60W, 30W, 15W
• 100V: 120W, 60W, 30W

Nominal Sensitivity

Music

• Passive @ 1W: 94 dB
• Passive @ 2.83V: 94 dB

Voice

• Passive @ 1W: 95 dB
• Passive @ 2.83V: 95 dB

Nominal Maximum SPL (Whole Space)

Music

• Passive | Peak: 122 dB
• Passive | Continuous: 116 dB

Voice

• Passive | Peak: 123 dB
• Passive | Continuous: 117 dB

Equalized Sensitivity

System

• @ 1W: 94 dB
• @ 2.83V: 94 dB

Equalized Maximum SPL

System 

• Peak: 122 dB
• Continuous: 116 dB

Required Accessories 

• High Pass Filter - 90 Hz, 24 dB /octave, Digital Signal Processor

Recommended Amplifiers

• Passive 150W - 300W @ 8 Ohms, (35V - 49V)

Input Connection

• NL4 Speakon-type connector and 2-position terminal strip for low impedance or constant voltage operation

Controls 

• 5-position tap selection / low impedance selector switch, Music / Voice switch

Mounting Points

• Two (2) M8 rigging points

Environmental

• IP55W per IEC 529, designed to MIL-STD-810G
• Color-matched ABS plastic input panel weather cover with 13.5mm ID gland nut installed in .82" knockout 

Dimensions 

• H x W x D: 9.00" x 10.15" x 10.20" (229 x 258 x 259 mm)

Weight

• 17 lbs (7.7 kg) with included yoke