Community V2-28B Dual 8" 2-Way, Full Range 90° x 70° Loudspeaker

The V2-28 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. This versatile unit is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. With its powerful dual cone drivers, the V2-28 provides additional low frequency and midrange output over that of its sister product, the V2-8. When paired with a subwoofer such as the V2-212S, a V2-28 system will produce high-fidelity, broad spectrum sound that belies its modest size. In addition to distributed systems, the V2-28 is an excellent choice for ancillary delay applications. When used to augment a front-of-house system in venues such as auditoria, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-28 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation.

The V2-28 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions.

• DYNA-TECH™ driver protection circuitry
• Ferrofluid-treated HF driver for improved heat dissipation
• Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
• Constant-directivity rotatable square horn
• Frequency shaded woofers for smooth vertical pattern control
• Terminal strip and NL4-compatible connectors
• Available in standard black or white finishes
• Mounting yoke included with 10° and 20° vertical standoffs
• Optional V2-28T autoformer model for 70V/100V applications

Loudspeaker Type

• Compact two-way, full-range, trapezoidal, vented bass, frequency shaded LF, user rotatable horn

Operating Range

• 60 Hz to 18 kHz (-10 dB)

Frequency Response

• 90 Hz to 16 kHz (±3 dB)

Max Input Ratings

• 300W continuous, 750W program
• 34.6 volts RMS, 69.2 volts momentary peak

Sensitivity (1W/1m)

• 94 dB (100 Hz to 12.5 kHz) free space

Maximum Output

• 119 dB SPL / 125 dB SPL (peak)

Nominal Impedance

• 4 ohms

Minimum Impedance

• 3.4 ohms @ 200 Hz

Nominal –6dB Beamwidth

• 90° H x 70° V (in vertical position)

Crossover Frequency

• 1.3 kHz

Recommended Signal Processing

• 70 Hz, 24 dB/octave Butterworth high pass filter

Drivers

• LF 2 x 8-inch cone
• HF 1 x 1-inch

Driver Protection

• DYNA-TECH protection circuitry

Input Connection

• NL4-compatible locking connector with terminal strip in parallel

Controls

• None

Enclosure

• Trapezoidal (22.5° included angle)
• 18mm, 11-ply cross-laminated birch

Mounting/Rigging Provisions

• 9 x M6 threaded rigging fittings
• 4 x M8 for third-party suspension products

Finish

• Catalyzed polyester two-part paint, black or white

Grille

• Powder coated steel, black or white finish

Required Accessories

• None

Supplied Accessories

• Yoke-style mounting bracket with optional 10° and 20° standoffs that allow a 10° or 20° downward or upward vertical tilt

Dimensions

• Height: 25.5 inches (649 mm)
• Width: 11.3 inches (287 mm)
• Depth: 11.7 inches (298 mm)

Weight (incl. bracket)

• 36.7 lbs (16.7 kg)
• 38.7 lbs (17.7 kg) with autoformer