Evertz 500FR Exponent High Density Video Distribution Frame (15 x 501ADA-EQ Cards)

The Evertz 500FR Compact Distribution Frame is an ideal solution for today's vast digital video distribution requirements.

It handles the high-speed requirements of HDTV as well as Analog and SDTV signals. The frame design allows extraction of modules from the front without compromising performance even at 1.5GB/s. The 500FR Compact Distribution Frame is a 3RU frame designed to house up to 16 single slot modules.

501ADA-EQ Analog Distribution Amplifier

The 501ADA-EQ Analog Distribution Amplifier is a general purpose amplifier for distributing 75Ω analog video signals.

The 501ADA-EQ features one balanced equalized input with nine unbalanced outputs. The 501ADA-EQ amplifier has been designed to distribute a wide range of analog video signals. It can also distribute other pulses and signals that are less than 2V p-p.

The 501ADA-EQ is housed in the 3RU 500FR frame that will hold up to 16 modules.

• Exponent achieves the highest density with 288 BNC outputs (per 6RU)
• Uses less power supplies thus less points of failure (per 6RU)
• Provides a direct connection to an SNMP network. Some competitive pseudo SNMP solutions require intermediate application servers or protocol translators which add latency, single point of failure issues, cost, and complexity.

500FR

Electrical

• AC Mains Input: Auto ranging, 100 to 240V AC, 50/60Hz
• Max. Operating Current: 2.6 A (@ 120V AC), 1.4 A (@ 240V AC)
• Max. Power Consumption: 200W
• Max. Module Load: 160W (10W per slot)
• Power Supply Configuration: Dual, redundant, separate AC inlets
• Connector: IEC 60320 - 1 per power supply
• Fuses: 4 amp, 250V time delay 5x20 mm. - 2 per power supply
• Safety: CSA Listed | Complies with CE Low voltage Directive
• EMC: Complies with FCC part 15, class A | Complies with EU EMC directive

Physical

• Height: 5.25” H x 19” W x 9.5” D (133mmH x 483mmW x 368mmD)
• Module Capacity: 16 slots
• Weight: Approx 17lbs (7.7kg) with 2 power supplies, no slots occupied | Approx. 32lbs (14.5kg) with 2 power supplies all slots occupied

Certification

• Safety: CSA Listed | Complies with CE Safety Directive
• EMC: Complies with FCC part 15, Class A EU EMC Directive
• Signal Connections: BNC Per IEC 61169-8 Annex A (10 per slot)
• Status Indicators: PSU status LED, Local Error/Failure LED
• Tally Output Connector: 4-pin terminal, relay N/O, N/C for status/fault alarm 2A, 125V DC max
• Temperature: 0-40°C optimal performance | 0-50°C operating

501ADA-EQ

Analog Video Input

• Standards: Any analog video format, up to 2V p-p and 30MHz bandwidth
• Connector: 1 BNC per IEC 61169-8 Annex A
• Common mode range: > 6V p-p
• CMRR: > 70dB to 1kHz
• Signal amplitude: 2.5V p-p max
• Cable equalizer: 0 to 300m of Belden 8281 or 1694A cable
• Impedance: 75Ω terminated, 35kΩ Hi-Z (jumper selectable)
• Coupling: AC or DC (jumper selectable)
• Return loss: > 40dB to 10MHz, > 30dB to 30MHz

Analog Video Outputs

• Number of Outputs: 9 Per Card
• Connector: BNC per IEC 61169-8 Annex A
• Output impedance: 75Ω
• Gain control range: ±5dB
• DC Level: < ±100mV (with DC Coupling active)
• Freq. Response: < ±0.05dB no equalization | < ±0.09dB for 5 to 100m Belden 8281or 1694A (to 5.5MHz) | < ±0.15dB for 100 to 300m Belden 8281 or 1694A (to 5.5MHz)
• Differential Gain: < 0.17% 0 to 300m
• Differential Phase: < 0.19° 0 to 300m
• C/L gain inequality: < ±0.1% for all cable lengths
• C/L Delay: < ±2ns
• Output isolation: > 42dB to 10MHz, > 32dB to 30MHz
• Output return loss: > 40dB to 30MHz
• Noise performance: < -78dB RMS NTC7 weighting, < -70dB RMS 15kHz to 5.5MHz

Electrical

• Voltage: +12V DC
• Power: 1.2W
• EMI/RFI: Complies with FCC Part 15 Class A EU EMC Directive

Physical

• Number of slots: 1

• 1 x Evertz 500FR
• 15 x Evertz 501ADA-EQ Cards