Panasonic AW-RP150 Touchscreen Remote Camera Controller

The AW-RP150 will be the newest remote camera controller to compliment Panasonic's comprehensive professional PTZ camera lineup. It has the same great functionality of the AW-RP120 and AW-RP50, and joins the lineup with significant improvements over those models, including a new one-hand operation joystick (controlling PTZ or Focus) and a large touch-panel LCD screen for monitoring and menu setting.

• Power Requirements: 12 V DC (10.8 V to 13.2 V)
• Current consumption: 1.0 A (Connector Input) | 0.6 A (PoE+ power supply)
• Ambient Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
• Ambient Operating Humidity: 20% to 90% (no condensation)
• Storage Temperature: -20 °C to 50 °C (-4 °F to 122 °F)
• Weight: Approx. 3.2 kg (7.05 lb)
• Dimensions (W x H x D) (mm): 342 mm x 178 mm x 245 mm (excluding protrusions)
• Dimensions (W x H x D) (inch): 13-15/32 inches x 7 inches x 9-21/32 inches (excluding protrusions)
• LCD Display: 7-inch Touch Panel GUI Monitor (WVGA (800×480) )
• SD Memory Card slot: SDHC / SDXC Memory Card Slot x 1
• No. of Connectable Cameras: 200 (IP), 5 (RS422)
• No. of Camera Selection Buttons: 10
• No. of Camera Groups: 20 (10 units per 1 group)
• Preset Memory: No. of memory : presets 100
• Tracing Memory: No. of cameras : Cam1 to Cam10 | Recording time, no. of memory settings : Maximum 5 min. total per camera, maximum of 10 settings per camera
• No. of User Assignable Buttons: 6 + up to 10 on the LCD menu
• Pan / Tilt Speed Adjustment: 7 levels
• Tally LED display color: green / red
• PoE+: IEEE802.3at standard: DC 42 V to 57 V (Camera Input)

Input / Output

• DC 12 V IN XLR 4-pin
• 3G-SDI IN
• SMPTE292 / 75 Ω (BNC x 1): Supported formats: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF
• ACTIVE THRU OUT: SMPTE292 / 75 Ω (BNC x 1)
• IP CONT: 100BASE-TX | PoE+ input | Connection cable: LAN cable, max. 100 m (328 ft) | When connecting the unit via a switching hub: Straight cable or a cross cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended | When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended
• SERIAL CONT (RJ-45): RS-422 (control signals for remote cameras), TALLY OUT | Connecting cable:
  Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft) | TALLY OUT: Open collector output (negative logic) | Maximum voltage resistance DC 24 V, Maximum current 50 mA
• TALLY/GPIO 1: D-sub 25-pin, female, inch thread | TALLY IN : 10 inputs (for receiving photocoupler signals) | GPI : 6 inputs (for receiving photocoupler signals) | GPIO : 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic) | Input/output switched with menu settings
• GPIO 2: D-sub 25-pin, female, inch thread | GPI : 10 inputs (for receiving photocoupler signals) | GPIO : 10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic) | Input/output switched with menu settings | Reserve connectors: 2 connectors (For future expansion feature)